Mfgr's Price: $0.25
Today's Cost: $0.20
Vial Container for Rotor, Turbines, Cartridges and small parts shipping
|
Mfgr's Price: $12.00
Today's Cost: $7.75
Replacement Handle for Latch Heads. Comes with screw.
|
Mfgr's Price: $19.95
Today's Cost: $9.50
Chevron Mineral Based Grease for packing High Speed Bearings
|
Mfgr's Price: $18.95
Today's Cost: $8.50
Diester Based Grease for packing Low Speed Bearings -Waterproof
|
Mfgr's Price: $42.95
Today's Cost: $15.50
Converts 2 hole Borden Handpiece to 4 or 5 Hole Midwest Hose Connector
|
Mfgr's Price: $42.95
Today's Cost: $18.00
Converts 4 hole handpiece to 2 or 3 hole hose connector
|
Mfgr's Price: $9.95
Today's Cost: $4.00
Conversion Cup
|
Mfgr's Price: $24.95
Today's Cost: $9.75
4-Hole Asepsis Nut and Metal Connector
|
Mfgr's Price: $0.25
Today's Cost: $0.17
Stainless Bright Shipping Pins, .75" long
|
Mfgr's Price: $12.00
Today's Cost: $2.50
Slinger or Air Dam to block contaminants from entering handpiece, Use with all Stylus Models, Mini and Dentex turbines
|
Mfgr's Price: $2.95
Today's Cost: $1.40
Application: Bien Air Bora, Black Pearl and TDS-783_x000D_Fiber washer located on either side of turbine cartridge to protect bearing housing.
|
Mfgr's Price: $12.00
Today's Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Today's Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece, Use with 6500 & 8000
|
Mfgr's Price: $12.00
Today's Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Today's Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $14.95
Today's Cost: $7.75
2-Piece Dam and Bearing Cup Set with air-lock slinger to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Today's Cost: $4.55
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $9.00
Today's Cost: $3.90
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $3.75
Today's Cost: $2.00
SuperFlex Grey Replacement Hose Sold and Cut By The Foot -24 inches minimum
|
Mfgr's Price: $34.95
Today's Cost: $28.00
SuperFlex Grey Replacement Hose with Midwest-Style Connector
|
Mfgr's Price: $12.95
Today's Cost: $6.00
Standard screw-type chuck, all square drive handpieces for Quiet Air
|
Mfgr's Price: $12.95
Today's Cost: $6.00
Standard screw-type chuck, universal. Square Drive.
|
Mfgr's Price: $12.95
Today's Cost: From $0.75 to $1.25
Standard canister screw-type chuck assembly and matched spindle. Both pieces assembled_x000D_
|
Mfgr's Price: $12.95
Today's Cost: $1.25
Replaces Screw Type Chuck for NSK NPA-M03. Includes the outside spindle.
|
Mfgr's Price: $2.50
Today's Cost: $0.60
Stainless Steel Grade 5 Snap Connector Balls
|
Mfgr's Price: $8.95
Today's Cost: $4.50
Thread Set Ferrell for Back-End Thread Replacement
|
Mfgr's Price: $9.95
Today's Cost: $5.25
Bien Air Prestige Cup Cover for Rear Bearing
|
Mfgr's Price: $9.95
Today's Cost: $5.50
Bien Air Prestige and Ondine Cup Cover for Front/Bottom Bearing
|
Mfgr's Price: $30.00
Today's Cost: $25.00
Professionally clean, install, test and certify installation of our turbines or cartridges. One installation fee for up to 10 turbines purchased now or previously purchased.
| |