Mfgr's Price: $495.00
Today's Cost: $228.00
Water Air and Power. Portable Handpiece Delivery Unit with Single Control
|
Mfgr's Price: $59.95
Today's Cost: $42.00
Accurately measure the performance and efficiency of your handpiece at the source. 4 HOLES USE ONLY
|
Mfgr's Price: $350.00
Today's Cost: $289.00
Professional Service Kit for Kavo 2307 Motor assembly and Operating Adjustment
|
Mfgr's Price: $39.95
Today's Cost: $25.00
Chuck Force Tester Gage Measures Grip Force of Dental Cartridge and Turbine Chucks
|
Mfgr's Price: $44.00
Today's Cost: $38.00
APPLICATION: For removal of spray cover nut on the Kavo 25-LHA electric handpiece attachment
|
Mfgr's Price: $32.00
Today's Cost: $28.00
APPLICATION: Use to remove the back cap on the Kavo 25-LHA electric handpiece attachment
|
Mfgr's Price: $55.00
Today's Cost: $42.00
APPLICATION: Use to remove the CROWN NUT from the back of the Kavo 25-LHA electric handpiece attachment
|
Mfgr's Price: $29.95
Today's Cost: $24.00
APPLICATION: Used with WA-99LT Ceramic Bearing on the WA-99LT handpiece by W&H. For Late Model 3 Detent Cap style
|
Mfgr's Price: $8.99
Today's Cost: $3.90
High Temperature bearing adhesive for setting bearings onto spindle.
|
Mfgr's Price: $29.00
Today's Cost: $12.00
Assembly tool for installing the spring ring onto all 67 and 68 series headgear cartridges
|
Mfgr's Price: $199.95
Today's Cost: $155.00
APPLICATION: Most Makes and Models
Bearing Changer Kit. Field Kit for open turbines, canisters and cartridges.
|
|
Mfgr's Price: $19.95
Today's Cost: $9.50
Chevron Mineral Based Grease for packing High Speed Bearings
|
Mfgr's Price: $18.95
Today's Cost: $8.50
Diester Based Grease for packing Low Speed Bearings -Waterproof
|
Mfgr's Price: $29.95
Today's Cost: $16.50
13 Page pictorial guide to dental handpiece repair.
|
Mfgr's Price: $29.95
Today's Cost: $10.00
13 Page pictorial guide to dental handpiece repair. DOWNLOAD EDITION [.pdf]
|
Mfgr's Price: $34.50
Today's Cost: $31.00
Dual Sides for Most Kavo Spray Ring Sets
|
Mfgr's Price: $80.00
Today's Cost: $29.00
Press Block for stabilizing turbine rebuilds and press pin base
|
Mfgr's Price: $119.00
Today's Cost: $42.50
Portable Lightweight Handpiece Contol with 1 meter hose
|
Mfgr's Price: $39.95
Today's Cost: $22.00
Press block for a wide ranges of shim, raceway and bearing removal
|
Mfgr's Price: $225.00
Today's Cost: $162.00
Pin and base set for high speed turbine overhauls. Sets impeller location. Press Block Included
|
Mfgr's Price: $45.00
Today's Cost: $32.00
For Accurate Placement of Impeller on Spindle Shaft
|
Mfgr's Price: $75.00
Today's Cost: $28.00
For Pressing off Bearings and Impeller on High Speed Spindles
|
Mfgr's Price: $49.95
Today's Cost: $22.00
PITTSBURGH Digital Thickness Gauge. Accuracy +/- .004" (.1mm) Reads in millimeters and inches
|