Mfgr's Price: $0.49
Tech Cost: $0.32
.006" washer for Star 430 series turbines
|
Mfgr's Price: $0.49
Tech Cost: $0.32
.020" washer for Star 430 series turbines
|
Mfgr's Price: $0.69
Tech Cost: $0.40
.006" thrust washer for Star 430 series turbines in wave spring format
|
Mfgr's Price: $0.69
Tech Cost: $0.44
"C" Clip washer for Star 430 series turbines
|
Mfgr's Price: $0.75
Tech Cost: $0.60
Precision shim for turbine length control. Available at .002", .010" and .015"
|
Mfgr's Price: $4.65
Tech Cost: $2.80
Full set of Rings, Clips and Washers for the bearings used on Star 430K or 430SWL handpieces. Also can be used on Endura, Solara and Vista models as well, autochuck or key chuck modes.
|
Mfgr's Price: $2.75
Tech Cost: $1.50
Pressure Washer for PowerLever and Pushbutton Models
|
Mfgr's Price: $1.49
Tech Cost: $0.30
Wave Washer for Quiet Air, Tradition and 8000 Models
|
Mfgr's Price: $2.75
Tech Cost: $1.50
Pressure Washer for PowerLever and Pushbutton Models
|
Mfgr's Price: $1.75
Tech Cost: $0.50
Bottom nylon spacer for use in W&H models, Impact Air 45, Lares and Dentex models where required.
|
Mfgr's Price: $6.00
Tech Cost: $4.25
Front Dust Cup for Lab Handpieces
|
Mfgr's Price: $0.70
Tech Cost: $0.50
Bearing Pre-Load Wave Washer for Select Midwest and Dentex High Speed Models
|
Mfgr's Price: $11.95
Tech Cost: $9.00
Bezel Ring For 647B/655B/650B and 649B. Use to secure the Face Plate on the Front of Handpiece
|
Mfgr's Price: $0.70
Tech Cost: $0.35
Bearing Pre-Load Wave Washer for Select Kavo, Lares and W&H High Speed Models
|
Mfgr's Price: $0.70
Tech Cost: $0.55
Bearing Pre-Load Wave Washer for Kavo 4500/6000/8000 Front (Bottom) Location
|
Mfgr's Price: $2.75
Tech Cost: $1.20
Pressure Washer for Midwest Stylus ATC 990 Model
|
Mfgr's Price: $12.00
Tech Cost: $3.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $9.95
Tech Cost: $4.50
Sold Individually. Cup Cover Midwest Smooth Bearing, Used in Stylus Turbine Applications. Any NSK or Midwest Smooth Bearing at .093" (2.38m) will fit precisely into this cup
|
Mfgr's Price: $12.00
Tech Cost: $2.50
Slinger or Air Dam to block contaminants from entering handpiece, Use with all Stylus Models and Mini
|
Mfgr's Price: $2.95
Tech Cost: $1.40
Application: Bien Air Bora, Black Pearl and TDS-783
Fiber washer located on either side of turbine cartridge to protect bearing housing.
|
Mfgr's Price: $12.00
Tech Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Tech Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece, Use with 6500 & 8000
|
Mfgr's Price: $12.00
Tech Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Tech Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $14.95
Tech Cost: $7.75
2-Piece Dam and Bearing Cup Set with air-lock slinger to block contaminants from entering handpiece
|
Mfgr's Price: $12.00
Tech Cost: $4.25
Slinger or Air Dam to block contaminants from entering handpiece
|
Mfgr's Price: $9.95
Tech Cost: $5.25
Bien Air Prestige Cup Cover for Rear Bearing
|
Mfgr's Price: $9.95
Tech Cost: $5.50
Bien Air Prestige and Ondine Cup Cover for Front/Bottom Bearing
| | |